|SHDesigns: Scott Henion's Welding pages.||Page hits:|
Started with a frame from 1.5" angle iron and rails from an old set of shelves.
Wheels are from an old riding mower.
|Had a dead transaxle from riding mower. Cut off the shafts and welded them in.|
|More sample welds. The Miller CP-250 is working well but still need to tweak the inductance.|
|Side and bottom are from some 20ga shelving. Completely seam welded the box.|
|Basically all done except for the latch on the tailgate. Tailgate has piano hinge welded on.|
Another picture. Needs sanding and paint.
I have used it many times. It is very strong; have hauled a full load of dirt with no problems.